⬣ Disassemble, Clean, Check Head/Parts & Estimate Job
⬣ Competition Valve Job Only
⬣ Set Spring Heights & Pressure
⬣ Install Valve Guides and Hone
⬣ Install New Seat
⬣ Check a Pair of Heads for Cracks, PSI Test Only
⬣ Resurface a Pair of Heads
⬣ Clearance Heads for Pushrods
⬣ Angle Mill Heads
⬣ Lap Valves
⬣ Lap Valves & Back Cut
⬣ Rework Combustion Chambers
⬣ Valve Guide Hone
⬣ Cut Spring Pocket for Larger Spring
⬣ Cut Guide for Positive Seal
⬣ Weld & Repair Aluminum Heads
⬣ CC Combustion Chamber to Figure Compression Ratio
⬣ Port Match Intake Manifold to Heads
⬣ Port Match Intake Manifold & Plenum Blend on Big Duke/Big Chief Heads
⬣ Clover Port Plenum for Carb & Port Match Manifold
⬣ Port Complete Intake Manifold
⬣ Surface all Four Side of Intake Manifold
